Automatiseer et Vereenvoudig
uw workflow en delegeer repetitief pipetteerwerk aan de BECKMAN COULTER Biomek 4000.
Ontdek meer!
Reserveer dus gerust een AFSPRAAKJE op Laborama
via biomek4000@analis.be
Het nieuwe Biomek 4000 Workstation lift uw productiviteit en nauwkeurigheid naar een hoger niveau. Verlies minder tijd aan praktische taken zodat u zich meer kunt toeleggen op research.
Intuïtieve pictogramgestuurde software
Gebruiksklare methoden voor genomische en cellulaire toepassingen
Nauwkeurig en reproduceerbaar pipetteren van 1 tot 1000 microliter, met monokanaals- of multikanaalspipetten
Automatisatie van het volledige proces met integratie van een schudtoestel of temperatuurcontroller voor uw monsters
Gemakkelijk aanpasbaar aan uw researchvereisten
BECKMAN COULTER NEW BIOMEK 4000
LABORATORY AUTOMATION WORKSTATION
biomek4000@analis.be
www.analis.be/biomek4000

JEOL’s new benchtop SEM - the NeoScope JCM-6000 - is as simple to operate as a digital camera, but has the powerful electron optics of an SEM, with up to 60,000X magnification. The NeoScope makes it simple for any skill level of operator to obtain outstanding SEM images in less than three minutes from sample loading to imaging.
The microscope has a stylish new design with up-to-date features. Operation is via a touch screen, and is simplified with auto focus, auto alignment, auto contrast and auto brightness controls. The NeoScope operates in both low and high vacuum modes with three settings for accelerating voltage. These parameters are suitable for a variety of applications, all of which can be programmed in special pre-stored recipe files.
This all-new NeoScope now offers integrated, full-featured Energy-dispersive X-ray Spectroscopy (EDS) with SDD technology for advanced analytical applications.
The NeoScope serves as a high throughput quality control and failure analysis tool, as well as accelerates the pace of research in a wide variety of fields.
Come and try the NeoScope at Laborama, JEOL booth 2-B7.
The JEOL NeoScope is distributed by Nikon in the Benelux.
For more information or a demonstration:
sales@jeolbenelux.com - tel. +32 2 720 05 60
info@nikonmetrology.com - tel. +32 16 74 01 00

LabWare, wereldwijd bekend op het gebied van enterprise LIMS en instrument interfacing software heeft onlangs de officiële release aangekondigd van versie 2 van LabWare ELN.
LabWare ELN is een belangrijke component van de Enterprise Laboratorium Platform oplossing strategie.
LabWare ELN is een innovatief product dat wetenschappers en andere laboratorium medewerkers voorziet van automatisering tools om experimenten te beheren, methodes en taken op de juiste wijze uit te voeren en om `Intellectuele Eigendom` vast te leggen, te bewaren en te beschermen.
LabWare ELN is een experiment en workflow gedreven software applicatie die klanten in staat stelt om hun experimenten inclusief relevante wetenschappelijke informatie en observaties, instrument resultaten en bijlagen zoals spectra, chromatogrammen etc. elektronisch te documenteren. Het product werkt naadloos samen met LabWare LIMS, waardoor alle gegevens binnen LIMS toegankelijk zijn door het ELN en vice versa.
In aanvulling op de mogelijkheid om wetenschappelijke experimenten te automatiseren, biedt het systeem ook Laboratory Execution System (LES) mogelijkheden. Laboratoria die werken aan GMP monsters zijn verplicht om gestandaardiseerde testmethoden (STM's) te volgen bij het testen. LabWare ELN helpt ervoor te zorgen dat de laboranten worden gestandaardiseerde testmethoden uitvoeren op basis van de juiste volgorde van stappen bepaald in de SOP, hetgeen de operationele efficiency en naleving van regelgeving verbetert.
LabWare ELN v2.0 introduceert een aantal nieuwe en belangrijkste kenmerken en functies waaronder:
• Een nieuwe Document Editor - Tekstverwerking voor document-gebaseerde experimenten
• Bewerkingsmogelijkheden van experiment bijlagen.
• LabWare Active Synchronisatie technologie
• Verbeteringen op het gebied van ELN en experiment beveiliging.
Bezoek onze stand tijdens Laborama: standnr. 2E2
www.labware.com
Email: verstappen@labware.com
Tel: +31 495 451948
Mob:+31 6 51646610
NEW - DNA/RNA & PROTEIN Quantification - TRINEAN XPOSE

The Xpose is a compact, benchtop spectrophotometer for high-speed quantification of DNA, RNA or protein samples.
Using its microfluidic slides, 1 to 16 micro-volume samples (2 µl) can be prepared on any bench before starting the measurement. This avoids time consuming sample loading and cleaning steps on the instrument, leading to minimal hands-on time and a fast read-out of 1 minute for 16 samples. The large, full color touch screen allows easy experiment design using predefined quantification protocols.
www.analis.be/xpose
Electronic 96-channel hand-held pipettor
VIAFLO96

The VIAFLO 96 introduces a totally new concept in 96 well pipetting, which is affordable and simple to use. It renders 96-channel pipetting as easy as manual single channel pipetting.
The VIAFLO 96 offers following advantages:
• Unique system: it is used like a hand-held pipette, therefore no special skills or training is required to work with the VIAFLO 96.
• Reliable.
• Small-size: compact and ergonomic design which allows the placement of the VIAFLO 96 into most laminar flow hoods to allow work under sterile conditions.
• Versatile: the colour display and industry proven touch wheel interface create an intuitive, easy to use pipette, with a full range of pipette modes and application specific programming.
• Productive: the VIAFLO 96 offers unmatched speed and ease of use for processing 96 and 384 well plates.
• Flexible.
Affordable 384-well pipetting
VIAFLO384

Integra Biosciences launched the new Viaflo 384, an enhanced version of the successful Viaflo 96 pipette. The new Viaflo384 has all the advantages of the Viaflo96.
It is capable of both 96- and 384-channel pipetting and therefore the ideal instrument for users already working with 384-well plates or planning to do so in the future.
The new 384-channel pipetting heads are available in 12.5 µl and 125 µl volumes and only work in conjunction with the new “XYZ GripTip boxes”, which are sturdier in built and feature an SBS footprint.
For more information about Elscolab, click here.
Definition
DSA: Designed and engineered to work seamlessly with PerkinElmer’s AxION® 2 Time-of–Flight (TOF) mass spectrometer, the AxION® Direct Sample Analysis (DSA)’s breakthrough technology enables scientists to get mass spectrometry results in seconds by eliminating the need for front-end gas or liquid chromatography separation. With this system, sample analysis time can be reduced by almost 99% and can provide significant cost savings as it eliminates the need for chromatography which dramatically improves laboratory workflows while delivering faster results.
TOF: The AxION® 2 Time of Flight (TOF) Mass Spectrometer hardware and software platform is specifically designed to bring speed and confidence to quantitation, target analysis and compound identification. This system offers optimum sensitivity, wide dynamic range and exact mass capabilities to help ensure quality and safety in pharmaceutical and food testing applications including accurate, reliable and confident analysis across environmental, industrial and forensic applications.
What’s new?
DSA and electrospray ionization (ESI) sources are interchangeable in minutes, no tools required. Semi-automation with a 13 position mesh for sample introduction.
TOF: Patented capillary shutter enables the capillary and entire source housing to be removed for maintenance without venting the system, maximizing instrument uptime. Dual-probe UltrasprayTM 2 ESI source enables real time lock mass calibration offering enhanced mass accuracy and simpler method development.
What’s unique?
DSA: Based on our patented field-free APCI (Atmospheric Pressure Chemical Ionisation) source, AxION DSA can be applied to a wide range of samples, both polar and non-polar. No front end chromatography is required and very little or no sample preparation. Fully enclosed operation for effective analysis of solids, liquids and gases in a single system.
TOF: Grounded probe with x,y,z adjustment delivers soft ionization and preserves molecular structure. TrapPulseTM technology gives on average a 10 fold increase in sensitivity. Collision induced dissociation (CID) under vacuum for reproducible fragmentation to gain greater structural insight.



No more troubles with water baths, we present you the new bead baths!
Lab Armor – Bead Bath

A Lab Armor Bead Bath performs all the essentials such as warming, thawing, incubating and chilling while maintaining a constant temperature just like a water bath, but with some extra benefits:
? The Bead Bath naturally holds things in place without accessories.
? Higher energy efficiency: water constantly evaporates during water bath operation which causes a cooling effect. Due to this evaporative-cooling effect, the bath must heat more frequently which increases energy consumption.
? The Bead Bath never has to be turned off.
? Any type of vessel can be used; they don’t have to be water-tight. No risk of water infiltrating into the vessels.
? An exceptional temperature uniformity of +/- 0.5°C at 37°C and +/- 1.0°C at 65°C and fewer temperature fluctuations.
? 3 Bead Bath sizes: 6, 14 and 20 litres, depending on your specifications, needs and applications.
? Environmentally friendly: efforts have been made to eliminate the need of germicides that are a common part of water bath maintenance. Bead Baths are dry and periodic decontamination with a biodegradable disinfectant such as 70% ethanol is usually all that is required. The Beads are formed from solid recyclable metal, which means that the raw material can be reused in other products.
No more melted ice, puddles, floating tubes or wet and contaminated samples!
Lab Armor - Chill Bucket

The Chill Bucket is a revolutionary laboratory ice bucket that works without ice. It chills while keeping everything dry and in place, so you no longer have to worry about water-borne contamination or losing track of your samples.
For more information about Elscolab, click here.
Geautomatiseerde of manuele wateranalyses?
Kiest u voor geautomatiseerde metingen?
Of het nu gaat om monstervoorbereiding, kuvettentest metingen of traceerbaarheid, dankzij de laboratoriumautomatisering met onze nieuwe laboratoriumrobot AP 3900 kan u wateranalyses zoals bijv. CZV, totaal stikstof, totaal fosfaat automatisch uitvoeren.
De AP 3900 is uw investering waard, zelfs met 20 metingen per dag. Ontdek de AP 3900 laboratoriumrobot….
Maak kennis met AllPhred…http://www.youtube.com/watch?v=szuLsN0mVo4
Bespaar tijd en geld: laboratoriumautomatisering met onze AP 3900 staat borg voor de grootst mogelijke precisie, productiviteit en nauwkeurigheid. Bekijk de video en u zal versteld staan van alle mogelijkheden voor uw lab.
Op onze stand 2-B11 geven wij u de mogelijkheid om deze robot te zien werken.
Mis alvast deze gelegenheid niet !
Of kiest u voor manuele metingen zonder compromis inzake resultaten?
Ontdek dan de DR 6000 UV-VIS spectrofotometer waarbij kwaliteit en efficiëntie elkaar ontmoeten.
Is uw devies: "Ik moet altijd op mijn resultaten kunnen vertrouwen"?
Dan voldoet de DR6000 aan al uw eisen, met:
• Verbeterde laboratorium efficiëntie
• Geoptimaliseerd datamanagement
• Nauwkeurige en betrouwbare resultaten
• Speciale applicatie pakketten voor drinkwater en brouwerij analyses
HACH LANGE heeft er vertrouwen in dat we u een passende oplossing kunnen aanbieden voor elke situatie!
Lees hier meer over de DR 6000
Kijk hier naar een filmpje over een enzymatische bepaling met de DR 6000

Nuremberg. De divisie Industry Automation van Siemens lanceert de « single-page-application » versie van de SIMATIC IT R&D Suite software. Het is voortaan mogelijk om dit software platform voor R&D en kwaliteitsbeheer te gebruiken op elke tablet met een web browser. De strakke aanpak uit zich in het ”single page application” concept dat uitvoerige menu’s, veelvuldig dubbelklikken, en talrijke schermen overbodig maakt. Het scherm toont enkel de logische opties in functie van de huidige activiteit van de gebruiker, samen met de nodige achtergrondinformatie. Datasynchronisatie is verleden tijd.
Deze nieuwe aanpak biedt de gebruiker een totnogtoe ongekende flexibiliteit, mobiliteit, en toegankelijkheid. Via zijn tablet kan hij altijd en overal zijn lab applicatie gebruiken. Het mobiele software platform zet alle sterktes van de tablet in en geeft met een eenvoudige, gebruiksvriendelijke user interface uw labo een nieuwe dimensie. De voetafdruk van de software op het toestel is verwaarloosbaar aangezien enkel een browser nodig is (IE10, Firefox, Chrome, Safari). SIMATIC IT R&D Suite ondersteunt bovendien zowel Oracle als Microsoft SQL Servers. Dit concept maakt ook de IT-afdeling het leven gemakkelijker aangezien het beheer, de roll-out en de upgrades ervan vlot gaan, en het drukt bovendien de eigendomskosten.
SIMATIC IT R&D Suite is het Siemens software platform voor R&D en kwaliteitsbeheer. Het omvat componenten, modules en bibliotheken voor R&D en kwaliteit, zoals LIMS, Electronic Lab Notebook (ELN), specificatiebeheer, Formule- en receptenbeheer, leveranciersbeheer, Regulatory data management, Project data management.
U bent hartelijk welkom om de SIMATIC IT R&D Suite te komen ervaren (ook op uw eigen pad) op:
• Laborama, stand 2-D1, 14-15 maart in Brussel
• Lab Automation (FHI) op 9 april in Eindhoven
• Forum Labo à Paris, France, du 4 au 7 juin 2013 – Stand D 90
HALO fused core deeltjes met een grote van 5 micron.
Deze 5um deeltjes zijn nieuw en kunnen gepakt worden in kolommen zodat de manier hoe u denkt over HPLC kan doen veranderen door onderstaande voordelen :
* hoger plaatgetal t.o.v. andere 5um kolommen op de markt (> 150000 plate/m)
* Equivalent of hoger plaatgetal dan de meeste 3 micron kolommen met half zoveel druk.
* Verbeterede productiviteit als gevolg van de aanwezigheid van een smalle poreuze laag als 2.7um kolommen waardoor een hoog rendement op hogere debieten.
* lage tegendruk voor standard HPLC instrumenten
* De robuustheid van 5micron kolommen met de performantie van 3 micron kolommen.
* “Scalable “ van UHPLC scheidingen ontwikkeld op 2.7um HALO kolommen
Verkrijgbaar in HAL0 5 C18, HALO 5 C8, HALO 5 Hexyl-Phenyl en HALO 5 ES-CN !
HALO Penta HILIC 2,7 um : 5 hydroxyl groepen gebonden op het ligand.
De HALO Penta HILIC is de laatste additie aan de originele 2.7um Fused-Core kolommen van HALO.
NOT endcapped om de hoge polariteit van het pakkingsoppervlak te behouden.
De hoge densiteit en polariteit van de gebonden fase minimaliseert ion-exchange effecten met residuële silanolen.
Het is een zeer hoog polaire gebonden stationaire fase compatiebel met alle typische HILIC werkcondities.
Excellent piekvorm voor polaire componenten met een variatië van functionele groepen :
-zuren, basen en zwitterionen
-sterke en zwakke zuren en basen
-peptides, suikers, nucleobasen, nucleotides en derivaten

Achrom nv + 32 9 3800647
www.achrom.be , stand Laborama 2-C4